• >
  • Support
  • >
Frequently Asked Questions (FAQ)
Search Filter

Most popular questions for - G7 Plus Farmnavigator

Yes it is, it can be installed outside the cabin.

Register your product  in order to  download for free desktop suite, user manuals, tools, and software updates  and to get Customer Support.

It is possible to combine the Geosat 6 Farmnavigator to the external receiver that you prefer.
Farmnavigator G6 has an integrated GPS receiver, which could be use for normal road navigation. For precision agriculture operations you can choose different  external receivers compatible. 
G6 Farmnavigator  is compatible with any GPS external receiver that comunicates in NMEA strings 0183 via DB connection (see image for Pin-out diagram). The receivers must be set  to open  the strings GGA, RMC, VTG, GSA, GSV, ZDA GPS
Each time internet connection becomes available, it is possible to check for software updates.
To check for a software update:
•    Tap the SETUP button in the MAIN MENU
•    Select in the left column System Info
•    Tap the Check for Updates button
•    Tap on YES to download and install the update or
•    Tap on NO to stop the update
Once the software update will be completed, the unit will restart automatically.


To connect your device with the MyFarmnavigator portal, follow these steps:
       1.Turn ON the device
Open the “SETUP” page
       3.Select "WI-FI" and connect to a network

       4.Return to the main menu of the device
Open the “MyFarmnavigator” page
Log in with the same credentials with which you access the portal

Possible errors:
If an error occurs when connecting to the MyFarmnavigator portal on the G7/G12, check in the "WI-FI" section on the "SETUP" page that you are connected to an internet network.


You can connect to the NTRIP client with only two models of GPS receivers, the ALL IN ONE RTK and TURTLE RTK, the difference between the two is that:
ALL IN ONE RTK -> It is not necessary to connect to WI-FI to connect to the NTRIP client because it is equipped with an internal SIM for the connection.
TURTLE RTK -> You need to connect to a WI-FI network to connect to the NTRIP client because it is NOT equipped with an internal SIM for the connection.

To connect to the NTRIP client, follow these steps:
        1.Turn on the device(G7/G12)
        2.Access the “SETUP” page
        3.In the “Satellites” page scroll down until you find the “NTRIP client” section
        4.Enter the data to connect to the NTRIP client
        5.Click on “Connect”
It is possible that the problem depends on how the guidelines were recorded, particularly if so it deals with parallel lines and towed vehicles. The start of line recording (i.e. the moment you press to start recording) it must NOT be done with the vehicle stopped; this is because the saved point may not exactly match with the point where the truck is, and consequently the parallel line will be "oblique" with respect to the real drawn line.
To significantly reduce the error it is necessary to start the vehicle and keep it at a speed of about 7km/h and make sure that the medium itself is well aligned. Once this is verified, while driving press to start recording from the point A. Then press again when the key button is active again to complete the line registration.
Issue is caused by setting of Minimum speed, setted as 0 km/h, not optimal for this kind of antenna. Setting at 0,5 km/h shall fix the issue.
The Farmnavigator Auto-steering System controls your vehicle steering, and helps you stay on track following with great precision the guide lines set on the Farmnavigator.

This way, you can switch from the "light bar" system to automatic driving, meaning you can focus on controlling the implements instead of worrying about the steering wheel, which improves the quality and effectiveness of the job. Such a system is very useful in scarce visibility conditions, in case of fog and dusty fields.

You can disengage the auto steering by firmly grasping the steering wheel; vice versa you can engage it very easily by tapping the corresponding icon on the Farmnavigator display.
The Farmnavigator Autosteering system supports all vehicle interface types: Mechanical, ISO/CAN,
Hydraulic and Factory steer ready. Custom install kits are available to simplify installation for over 750 models of agricultural machines.
The MDU mounts on existing steering wheel without requiring its removal thanks to the Patented universal ring gear. The MDU simply clamps on and off for fast and easy transfer across vehicles of different brands and types (tractors, sprayers, spreaders or combines).

In a already worked field to clear the Guiding Lines and the Worked Area is possible, but to change the settings of the Spray Boom is not possible.

If your AvMap Geosat doesn’t work properly, please contact the AvMap Technical Support team by e-mail on [email protected] .

Firstly you will be helped to solve your problem remotely by following standard technical support procedure. If this attempt is not successful, you will receive a Return Machine Authorization (RMA) in order to send the unit (or its components) to our offices and get your device repaired.

Verify your registration ( your data and the details of your navigator ), if you are not registered yet please insert your datas on www.avmap.it - Support - Registration. This procedure is mandatory to ship the device in assistance if you will need.



AvMap navigators are guaranteed for 2 years after  the purchase date.


How to get Customer Support
for your AvMap device:

1.   Register your Navigator

2.   Read the FAQsection

3.   If you do not find the answer to your problem, then write us filling the online Assistance form or contact the CALL CENTER +39 0585 784044

4.   The Customer Support will reply providing you instructions.

5.   If the problem cannot be solved over the phone or email, you will receive via email a repair code  ‘RMA’ with all the instructions to send us your navigator for repair.