Auto-Steering G5 Kit
AUTOMATIC STEERING
Auto-Steering G5 Kit
The automatic steering for
NOT-steer-ready tractors
A powerful Drive Unit effective at a
minimal speed of 600m/h
Auto-Steering Kit: the system
G7 Plus / G7 Iso / G12
The display of the system, sending commands to the ECU-S1.
ECU-S1
It detects orientation and movement of vehicle, receives GPS data and converts data from FARMNAVIGATOR display into steering commands.
MDU-G5
The powerful Mechanical Drive Unit steering the wheel.
Installation
Automatic set up and calibration
1. Connect the receiver (not included) to G7 / G12 via serial cable.
2. Connects the G7 / G12 to the ECU through the USB-VideoIN-Ethernet Cable.
3. Easily configure the ECU following the step-by-step wizard on the G7 / G12 display.
Installation Kits
Available MDU-G5 Installation kits:
-
for CNH and AGCO (KAASS00004)
-
for JD 6000-7000 NON PREMIUM (KAASS00005)
-
for CASE (KAASS00006)
-
for MTZ/Belarus (KAASS00012)
Check you compatibility first!
Download the compatibility list
Technical Specifications
FARMNAVIGATOR ECU-S1
Operating Temperature -20° C to 60° C |
Storage Temperature -40° C to 85° C |
IP-67 Humidity 95% non-condensing |
Certifications: FCC, Industry Canada, RoHS, CE, C-Tick |
Input Voltage 9-16 VDC |
Dimensions 153 mm x 147 mm x 57 mm |
Weight <1kg |
Connectors: 18-pin Male (power, display & GPS), 30-pin Male (for vehicle interface) |
Ethernet connection to display |
CAN Ports to Connect to ISOBUS Steering controller |
Wheel Angle Sensor input |
Pressure transducer input |
9-axis inertial sensors to provide enhanced terrain compensation |
RTK compatible ( connecting RTK antenna directly to ECU) |
LED indicators |
Included connection cables: cable harness (ethernet, power, NMEA-A, NMEA-B, Expansion, CAN); ECU-MDU cable. |
Included Accessories
|
||
Steering Wheel for MDU-G5 KAASS00008 |
MDU-G5 Motor |
MDU-G5 Main Cable |
ECU-S1 |
ECU-S1 Harness Main Cable KAAACBC002 |
Switched Power Cable KAASS00010 |
|
Support
Support
Support |